BRK Professionals

FAQ's/Troubleshooting

 

 

Why do smoke alarms chirp intermittently?

The "chirp" will only be caused by issues surrounding the battery or miss-wiring. However, a homeowner may confuse the chirp with an intermittent alarm. Try and get the homeowner to be specific as to what they are hearing. A “chirp” will have a higher pitched tone and sound in equal intervals about once every minute. An intermittent alarm will be random, sound usually for several seconds and have a lower pitched tone. Any of these situations can cause unwanted chirps:

  • Battery Pull-tab is Still in the Alarm
    The battery pull-tab must be removed after AC power is provided to the alarm.
  • The Battery Drawer is Open
    The battery drawer must be completely closed for the battery to make contact with the terminals.
  • Low Battery
    As the battery in a smoke alarm becomes weak, the smoke alarm will "chirp" about once a minute to alert you that the battery needs to be replaced. Note: Only the alarm with a low battery will chirp. No signal is sent through the interconnect wire. The other alarms will be silent.
  • Tip for Builder Service Managers
    During extended periods prior to occupancy where power is off, Builder Service Managers who maintain new homes prior to sale should be sure to open the battery drawer on alarms to keep the battery from draining. If power is restored temporarily (e.g. to show the home) the alarm will chirp if the drawer is open. The alarm now senses there is no battery.
  • Battery is Present but Part of the Terminal is Obstructed
    The battery may not be fully making contact with the terminals in the alarm. Check to be sure the battery pull-tab or some other obstruction is completely removed.
  • A Different Device or Appliance
    Security systems, monitors, carbon monoxide alarms, and other devices have similar low battery or alert signals.

»Download this FAQ in pdf format

 



©2011 BRK Brands, Inc. All rights reserved. Used under license by The First Alert Trust.